Smart Cat Water Fountain Filter Free with App Monitoring and Separate Water Tanks

This pet water fountain has separate clean water tank and wastewater tank, magnetically aligned during use. When moving it, lift both tanks with both hands to prevent them from detaching.

When powered by the battery, to maximize battery life, remote control via the app is unavailable, the continuous water flow mode is disabled, only the Sensor-activated water flow mode can be used.

Continuous Mode (Mode 1): The water in the bowl circulates inside the bowl and flows from the spout; fresh water comes in from the clean tank only when the water level gets low. The drain stays closed, so water does not keep running into the waste tank.

It opens only for a water change — triggered with the button or from the app, or, on the app version, on the schedule you set (every 24 or 48 hours).

Sensor Mode (Mode 2): Runs only when your cat comes near. When the infrared sensor detects movement within about 7.87 inches (20 cm), the water starts to flow, and it stops 20 seconds after your cat leaves or no movement is detected.

When connected to a household power source, the machine cannot be turned off. If the household power supply is interrupted, the machine will automatically switch to battery power.

Cleaning: When cleaning, rinse the tank and tray with water, wipe the main unit with a clean cloth. Do not wash the main unit.

Reinstallation: When reinstalling, ensure the pink water sensor faces up at the bottom to prevent inaccurate wastewater level readings.

Yes. The fountain is designed for cats and small pets, and we recommend it for small dogs.

Yes. A user manual comes in the box. The PDF manual and setup videos are also available in our Product Help Center.